40W CO2 Laser Tube Power Supply special designed for 30W - 50W CO2 Laser Tube and mini laser engraver, laser stamp engraving machine, very small volume and weight, very long warranty and lifetime.
1. The Main Feature:
1) Good compatibility: It can be applicable to 30W, 40W, 50W laser tube.
2) Fast response speed and effect.
3) Dramatically lengthen the life of laser.
4) Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc.
5) Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power.
6) The power supply has open circuit protection: Under the condition of good protective earth, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply.
7) The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser.
8) The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power.
9) Application: Acrylic sculpture, cut; Fabric sculpture, cut; Rubber sheet sculpture, cut, etc.
2. Specification:
Model Parameters |
40W Laser power supply |
|
Input |
Input Voltage |
AC220V±10% (Need AC110V products, ordering need indicate) |
AC frequency |
47 - 440HZ |
|
Max. Input power |
350W |
|
Max. Input current |
3A |
|
Output |
Maximum output voltage
|
DC25KV |
Maximum output current |
DC20mA(depending on the laser tubes of different manufacturers) |
|
Efficiency |
≥90%(Full load) |
|
MTBF |
≥10000 Hours |
|
Response speed |
≤ 1ms (Time from the TTL Signal is given to the output current up to 90% pre-setting current) |
|
Withstand Voltage |
Input-Output, Input-Enclosure: AC1500V 10mA 60S, Output cathode is connected with enclosure. |
|
Environment |
Operating temperature: (-10-40)degree Celsius,Relative humidity: ≤90% |
|
Cooling |
Force-Air Cooling (FAC) |
|
Environmental
|
Working temperature |
-10℃ - 50℃ |
Storage of temperature
|
-20℃ - 75℃ |
|
Relative Humidity |
Maximum 85% RH (non-condensing)
|
|
Altitude
|
100,000 feet of work 200,000 feet of storage, does not work |
|
Cooling methods |
Forced air cooling (fan cooling)
|
|
Dimensions (L*W*H) |
L×W×H=167*144*97(mm) |
|
Weight |
2.0KG |
Contact:John
Phone: +86-15818389161
Tel: +86-769-26384404
Email: sales@co2-lasers.com
Add: No. 50 /6 , Xianhuang Road , Wanjiang Street, Dongguan, Guangdong, 523045 China.