Double-Head Co2 Laser Cutting Machine

Double Head Co2 Laser Cutting and Engraving Machine MT-1280D work with 2 sets of co2 laser tube, power supply, cooling system and laser cutting heads, so that the processing efficiency will be doubled. Dual heads Laser Cutting Engraving Machine is to put the moving control into full play and therefore increase the working effects of laser processing. In each aspect, from the software design, mechanical structure to the configuration, the tenet is to serve for the processing to make sure the stability, precision and speed under the safe and overall quality-management working environment. There are two working places for this Laser Cutting Machine/Engraving Machine, which can alternate automatically so that the machine can cut while feeding and the feeding time is greatly decreased.

1. Specification:

Model	MT-1080D	MT-1280D	MT-1410D	MT-1610D
Work Area (cm)	100 × 80	120 × 80	140 × 100	160 × 100
Laser Generator	Water cooled Co2 glass sealed laser tube
Laser Power	70W/80W		80W/100W/130W
Drive Motors	Micro stepping stepper motor system
Control System	64 Bit DSP
PC Interface	USB 2.0 Port, USB Disk
Cutting Speed	0-48000mm/min
Resolution Ratio	<0.025mm
Power Supply	AC110V/220V-240V ± 10%, 50/60HZ
Location Precision	<0.01mm
Operating Temperature	0℃-45℃
Graphic Format supported	HPGL(PLT), JPGE, PCS, TGA, DST, DXP, DXF, DWG, CDR
Red Pointer	Optional
Dual Laser Head	Yes	Yes	Yes	Yes
Accessories	Water cooling unit, Air Pump, Exhaust Blower Unit
Warranty	12 Months
Dimension (cm)	198×160×120	218×160×120	238×180×120	258×180×120
Weight (kg)	360	450	540	630

2. Feature:

Two working places can alternate vertically and enable the cutting while feeding
100% production increase, 10% material consumption decrease and no abrasion on the baseboard
Continuous circle cutting and the maxi circle cutting speed: 30m/min
Laser power and speed can be matched automatically to ensure the best effects
USB2.0 high-speed port
Insulation system and high speed difference input and output electro circuit design can avoid the aberrance in distant signal transportation and realize the 12 working status output and 16 status input, which can easily connect with the working processing.
128 files can be save for the off-line computer work, which is proper for large quantity and repeat processing

3. Applicable Materials:

This type Laser Cutting Engraving is suitable to wood, paper, leather, cloth, organic glass, resin, acrylic, woolens, plastic,wollens,plastic,rubber,ceromlctile,crystal,bowlder,bomboo and other noon-metal material.

4. Applicable Industry:

This kinds model Double Head Laser Cutting and Engraving apply to cloth, leather, fabric toy, computerized Embroidery cutting, electric product.

5. Samples:

a